363 professional products and components for UAE farms and greenhouses.
Choose a crop or system to see the related components
Outlet end cap for closing a compatible NFT channel and directing return solution into a 32 mm drainage line. Confirm the channel profile, adhesive or sealing method, outlet elevation and return-pipe capacity before installation.
UV-resistant channel end cap with an integrated spout for controlled nutrient return from NFT growing rows. Match it to the exact channel cross-section and maintain adequate fall to the collection main to prevent standing solution around crop roots.
Individual media-filled hydroponic container for tomatoes, cucumbers, peppers and other heavy fruiting crops. The bucket is drip-fed and drains by gravity to a common return line; row spacing, media volume, emitter flow and return-pipe sizing must follow the crop plan.
Pair of siphon elbows for maintaining a small nutrient reserve in the base of a compatible Dutch bucket while directing excess solution to the return line. Check bucket-hole diameter, elbow orientation and drain-line height before commissioning.
Internal connector for joining compatible NFT channel sections into a continuous growing row. Confirm the exact channel profile, insertion depth and approved adhesive or sealant, then leak-test every joint before plants enter the system.
Light-blocking lid for a compatible Dutch bucket, with a central opening for a net pot, transplant block or crop stem. Match the lid footprint to the bucket rim and select the opening size around the propagation format and mature stem clearance.
Large square lid for 44-litre hydroponic buckets used with vigorous fruiting crops and higher root-volume targets. The opaque surface reduces light entry to the root zone; confirm bucket geometry, plant opening and irrigation access before ordering.
Moulded support bracket for holding a compatible V-shaped hydroponic drainage or collection channel at a stable elevation. Support spacing, channel load, floor level and required drainage slope must be verified across the full row.
Blank end cap for sealing the inlet or service end of a compatible 100 × 50 mm NFT gully. Confirm profile fit, sealing method and access for cleaning, and pressure-test the completed row at operating flow before planting.
Opaque nutrient reservoir for recirculating NFT and Dutch Bucket systems, sized for compact commercial zones. Final capacity must be checked against plant count, daily water demand and operating reserve; provide a screened pump intake, accessible drain and light-tight lid.
Continuous-duty pump for circulating nutrient solution from a reservoir through NFT channels or Dutch Bucket feed lines. Select the operating point from total flow and dynamic head, and include dry-run protection, an isolation valve and a removable intake screen.
Compact disc filter for protecting NFT inlets, drippers and small recirculation manifolds from root fragments and suspended solids. Match the mesh rating and clean-flow capacity to the emitters, install pressure checks across the filter and sanitize the element between crop cycles.
Four-outlet manifold for dividing filtered nutrient flow into independently serviceable NFT benches or Dutch Bucket rows. Size the inlet and branch valves for balanced flow, label every zone and provide unions so the assembly can be removed for cleaning and seasonal maintenance.
Programmable controller for repeating short irrigation cycles and coordinating a circulation pump with multiple hydroponic zones. Configure run and pause times from crop demand and measured drainage, and use correctly rated relays, manual override and alarm-safe defaults.
Coordinated entry-scale NFT package for approximately 100 lettuce, herb or leafy-green plants. The quotation can include channels, supports, net pots, nutrient reservoir, circulation pump, filtration and feed-and-return plumbing; final spacing, channel length and operating flow follow the selected crop and site.
Commercial NFT growing package planned around approximately 500 leafy-crop positions, with multi-row channels, structural supports, reservoir, circulation, filtration, distribution manifold and return collection. The final quotation is engineered from crop spacing, available footprint, water analysis and automation level.
Complete small-scale Dutch Bucket package for 24 tomatoes, cucumbers, peppers or similar fruiting plants. It combines buckets, lids, siphon elbows, drip-feed components and a common return line, with reservoir and pump options sized to the installation and crop cycle.
Commercial recirculating Dutch Bucket package for approximately 100 fruiting-crop plants. The system scope can include buckets, media, drippers, zoned feed manifold, nutrient reservoir, pump, filtration and drainage return; final capacity is based on crop water demand, row layout and elevation.
Pre-coordinated control skid for monitoring EC and pH and dosing compatible A, B and acid stock solutions into a hydroponic circulation or make-up line. Project configuration includes calibrated probes, chemical-safe dosing pumps, flow verification, low-level protection and commissioning targets.
Compact polypropylene sheet supplied in a roll for compatible growing-gutter applications. Confirm sheet thickness, gutter design and installation method with the project quotation. Availability, price and UAE delivery are confirmed with the quotation.