363 professional products and components for UAE farms and greenhouses.
Choose a crop or system to see the related components
Formed galvanized gutter for collecting roof runoff between multi-span greenhouse bays while contributing to the structural eave detail. Final profile, thickness, splice, seal and support spacing must follow the approved greenhouse and rainfall design.
Replacement roller set for compatible aluminium greenhouse sliding doors, including nylon wheels and mounting hardware. Verify wheel diameter, axle, track width and door height before ordering, and align both rollers to prevent binding.
Individually sleeved compressed coco cube for nursery finishing, vegetative plants and compact hydroponic production. Hydrate evenly, verify expanded volume and EC, and match the pre-drilled opening, dripper placement and drainage to the crop.
Uniform rockwool plug tray for commercial seed germination and cutting propagation with controlled water and air balance. Condition plugs to the crop pH, seed at consistent depth and manage irrigation by plug weight and root development.
Low-voltage geared motor for automating roof or side vents through compatible rack-and-pinion hardware. Calculate torque from vent area, linkage friction and wind load, then coordinate shaft alignment, limit settings and emergency manual operation.
Automatic valve for releasing accumulated air from irrigation mains during filling and admitting air during draining where specified. Install at hydraulic high points with an isolation valve and select size from pipe diameter, filling rate and operating pressure.
Pressure-rated bypass tank for dissolving and introducing fertilizer into irrigation water without an electric dosing pump. Confirm chemical compatibility, working pressure, bypass flow and safety devices, and rinse thoroughly after every batch.
Battery-operated tap timer for automating irrigation in villa gardens, nurseries and small greenhouse zones. The LCD controller supports multiple daily programs, manual watering and rain-delay control; confirm the 3/4-inch connection and protect the unit from direct spray and prolonged UAE sun.
Rechargeable 16-litre backpack sprayer for foliar fertilizers, approved crop-protection products and sanitation work. The electric pump reduces manual effort and the adjustable lance supports different spray patterns; rinse after use and follow chemical PPE, dosage and disposal instructions.
Portable multi-parameter meter for checking hydroponic nutrient solutions, irrigation water and stored water. Calibrate with fresh standards, rinse probes between samples and allow temperature compensation to stabilize before recording pH and EC readings.
Two-part hydroponic nutrient set for leafy greens, herbs, seedlings and vegetative growth in NFT, DWC, cocopeat and other soilless systems. Add Part A to water first, mix fully, then add Part B; never mix the concentrates directly and adjust final EC and pH to the crop stage.
Five breathable 20-litre fabric pots for tomatoes, peppers, herbs and compact fruit crops in gardens, balconies and nursery areas. The non-woven wall promotes drainage and root-zone aeration; place on a free-draining surface and check moisture more frequently during UAE summer.
Complete propagation kit with a 72-cell insert, bottom tray and adjustable clear humidity dome for vegetables, herbs and flowers. Vent gradually after germination, avoid standing water and move seedlings to stronger light once emerged to prevent weak stretched growth.
Reusable slotted net cups for lettuce, herbs, seedlings and clones in NFT, DWC, aeroponic and aquaponic systems. Confirm the channel-hole diameter before ordering, support young roots with a suitable plug and clean and disinfect the cups between crop cycles.
Ready-to-install micro-irrigation kit for up to 50 pots or planting points in villa gardens, nurseries and compact greenhouses. Pressure-compensating drippers improve uniformity; flush the line before connecting emitters and add filtration and pressure regulation where source-water conditions require them.
Commercial 16 mm drip tape for vegetable rows, berries, nurseries and seasonal field production. The integrated emitters deliver 1.8 L/h at 30 cm spacing; use filtration, regulate inlet pressure and flush laterals before and during the crop cycle.
Fine-orifice misting nozzles for greenhouse cooling, propagation humidity and outdoor mist lines. Confirm working pressure, filtration and nozzle spacing against the desired droplet size; use anti-drip bodies where crop wetting must be minimized.
Handheld meter with a long stainless probe for spot-checking moisture in soil, substrate beds and large containers. Take readings at repeatable depths and multiple locations, clean the probe between zones and use results with crop observations rather than as the sole irrigation trigger.
Heavy-shade UV-stabilized net for nurseries, holding areas, livestock shade and selected non-crop applications exposed to intense UAE radiation. Verify the required shade percentage for the crop, tension evenly and reinforce edges and wind-exposed fixing points.
Inline 1-inch regulator that stabilizes downstream pressure at approximately 1 bar to protect drip tape and low-pressure fittings. Install after suitable filtration, observe flow direction and confirm that system demand remains within the regulator operating range.
Compact bypass Venturi injector for introducing soluble fertilizer or approved treatment stock into small irrigation systems. Correct suction depends on pressure differential and bypass arrangement; calibrate injection rate with clean water before applying nutrients.
Battery-powered inline meter for checking instantaneous irrigation flow and accumulated water use in small zones and farm service lines. Match thread and flow range, install in the indicated direction and compare readings with design flow to identify leakage or blocked emitters.
Double-sided yellow cards for monitoring whitefly, leaf miner, fungus gnat and other flying pests in greenhouses and nurseries. Position consistently near the crop canopy, label by zone and date, inspect weekly and use counts to support an integrated pest-management decision.
Plant-origin liquid organic fertilizer rich in organic matter and free amino acids. Designed to support chlorophyll formation, protein synthesis, stable root development, flowering and crop resilience; suitable for foliar or fertigation programs under professional guidance.